Only produce wooden brushes since 2007

How to extend the service life of the brush-To fine dust-free

by:Boom Home     2019-08-18
The brush is also the same as other items. it will wear out during use and has its own definition of life. In the correct use method, the service life of the item can be extended, and the wrong use method will only. . . The brush is also the same as other items. it will wear out during use and has its own definition of life. In the correct use method, the service life of the item can be extended, and the wrong use method will only accelerate the service life.

what factors determine the service life of the brush? The following analysis of the three major factors:

1. Brush Quality:

The quality of the brush has most of the impact on the service life of the brush. For example, the double steel strip brush roller used in the stainless steel plate production line with strict requirements must be a double steel strip process, the inner welding must be neat, and the solder joints cannot be welded thoroughly or not, the length of each section must be controlled well, otherwise a brush roller should be assembled in 6 to 7 sections, and the total length can be controlled well and the installation can be stuck in place.

2. usage:

The Usage method of the brush roller is correct, which can greatly improve its service life. For example, the speed and pressure of a large snow brush must be controlled. The pressure with the ground is small, the snow is not clean, and the effect is not achieved; The pressure is too large, the wear is accelerated, and the use time is reduced. Therefore, we must grasp the rhythm and use it correctly. Extend its service life. The steel plate pretreatment line roller brush has aluminum alloy structure, strong hardness but brittle. if it is not tight during installation, it will crack if it is hit with a hammer, and it will not be damaged for long. When cleaning the steel pill, adjust the height of the new roller brush first. as the use time goes on, the roller brush wire is completely worn short, and then the roller brush will drop to the appropriate height. Only in this way can it be used correctly to extend its service life.

3. maintenance:

for the brush, the correct maintenance is also required to allow the brush to get an extension of its service life. Many people will think that the brush roller is generally used to clean industrial products or to carry out industrial polishing, and such uses make the brush generally only have problems such as dust, it is not maintenance. However, in fact, in the process of cleaning, some metal chips are sandwiched in the middle of the brush, and the effect will only become worse and worse for a long time. Whether it is an industrial brush or a strip brush for ordinary doors and windows, the most important thing is that the brush cannot be cleaned in reverse, and reverse cleaning will increase the gap between the brushes, resulting in division, it will also reduce the elasticity of the brush and increase the wear and tear. in the future, in industrial use, especially polishing, it is easy to scratch the product. After the brush is cleaned, use the dry and absorbent items to wrap the brush to absorb water. Be sure to squeeze along the structure of the brush. if you twist it, I believe that the brush may not be used after cleaning. In the case of not destroying the industrial brush material, the best drying is to dry in the shade. Let the brush hair down is followed by the trend of the brush, because the moisture in the brush itself will change the weight, thus changing the density of the brush. The brush in the textile industry should pay more attention to these problems. after all, if the brush loses its own features, it will damage the wool material in industrial use, but it will cause incalculable losses.

Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...