how to clean an electric toothbrush
It\'s free as long as you\'re using it.
Read this article to learn the right way to clean an electric toothbrush.
Although electric toothbrushes are more expensive than regular toothbrushes, many people use them to keep their gums and teeth healthy.
Those who have used an electric toothbrush feel that it is more effective than a manual toothbrush.
Some people think it works as well as the professional dental cleaning done by the dentist.
This is very beneficial for older people or people with arthritis or muscle problems who cannot touch the back teeth with a manual brush.
From a hygienic point of view, regular cleaning of electric toothbrushes is a must.
Shortly after brushing your teeth, take your toothbrush and open it under flowing warm water for about 10 seconds.
When cleaning the head of the brush, press and rub the bristles with your thumb.
This is done to remove the toothpaste residue left between bristles.
Avoid using cold water as it does not properly remove the toothpaste that is glued to the bristles.
Before cleaning the handle of the brush, turn off the brush and remove its head from the handle.
Now, put your hands under the warm water of the faucet and rinse clean from the surface of the toothpaste.
After that, wipe the handle with a clean cloth.
The toothbrush is then assembled and placed in an upright Cup to allow it to air dry.
In this way, you can keep your toothbrush in good usable condition for a long time.
Electric toothbrushes can usually be used for 3-
6 months depending on the manufacturer\'s advice.
If you find that the cleaning head of the toothbrush has worn out, you may have to replace it before that.
In order to disinfect the bristles, it is recommended to thoroughly clean the electric toothbrush at least once a month.
In addition, you should also choose to wash the toothbrush after a cold, because the toothbrush is a bacterial carrier that will breed in the mouth when you catch a cold.
This cleaning procedure includes the use of bleach and water.
Prepare the solution by mixing a bottle cap bleach in a cup of water.
Make sure the concentration of bleach in the solution is not too high as it will damage the bristles.
Before immersing the brush in the cleaning fluid, you must remove the head of the brush from its body.
Soak the brush head in a prepared bleach solution for half an hour to destroy the bacteria that grow on it.
After that, remove the toothbrush from the cleaning solution and rinse the bleach under the tap water.
In doing so, rub the bristles with your fingers to ensure that there is no trace of residual bleach solution in the bristles.
Once you are sure that the bleach has been completely washed, place the wet toothbrush on the dry towel so that the excess water is soaked.
This will ensure that the brush head dries faster.
Again, you can disinfect the electric toothbrush with hydrogen peroxide solution.
The body or handle of the toothbrush also needs to be thoroughly cleaned from time to time.
However, do not immerse the main body of the toothbrush in a bleach solution, as this will damage the Circuit of the toothbrush.
Take a pinch of detergent on a damp towel and use it to wipe the dirty area of the handle.
To clean up the dirt and debris accumulated in the gap of the toothbrush body, wipe an ordinary toothbrush on these areas.
Finally, rinse clean with fresh tap water.
Let it dry before you put it back on the charger.
After cleaning, brush must be properly stored.
Do not store an electric toothbrush in a closed cabinet as it promotes the growth of bacteria on the bristles.
Another thing that must be noted is that it is not placed on the same cup or brush holder with too many brushes, as it increases the chance for bacteria to spread from one brush to another.
It should be kept in a clean place in the bathroom so that bacteria in the air in the untidy bathroom do not use your toothbrush as a breeding ground.